Archive for the ‘Project Cars’ Category

Lomax exhaust

Friday, April 27th, 2012

Based around a Citroen 2CV, this little Lomax 3 wheeler kit car must be the most fun you can have at 30MPH. We love cars like this because they’re so full of character and you can have so much fun enjoying the driving experience without the need to be at breakneck speeds. This was a simple case of moving the exhaust from the nearside to the drivers side. The exhausts are normally placed on the passenger side to avoid deafening the driver but in this case the owner had bigger problems. The exhaust was irritating his girlfriend at that’s never a good idea!. We rebuilt the front pipes and fitted a stainless steel silencer supplied by the customer. Once the summer comes around this little car should bring it’s owner many happy journeys to work in the sunshine.

Ford Capri gets more aerodynamics

Friday, April 27th, 2012

The AA Silencers Ford Capri is always getting little developments here and there. Because of a change in championship regulations we have been able to develop a new front splitter and diffuser. The device is designed to control the airflow to the under body section. The splitter harvests pressure ahead of the car to create downforce. Further back air is accelerated to create downforce towards the middle of the car. The new front section controls the air in stages to manage its flow. It is also designed to create vortices along the underbody to seal the floor section and improve downforce. It’s not a perfect design as we have to work within the regulations but it vastly improves lap times. Also fitted are a type of dive plane in front of the rear wheel. Unlike regular dive planes these are mostly to deflect air from the exposed portion of the the tyre.

Rolls Royce Repairs

Tuesday, November 29th, 2011

If you’ve never driven a Roller you won’t be able to appreciate how effortlessly luxurious they are. This one was in need of some exhaust work and the owner wanted a full copy of the original exhaust in stainless steel. There are a lot of exhaust boxes in the twin system to keep it silent and the owner couldn’t stretch to having it all replaced, especially as a lot of it was still in remarkably good condition. Instead we built the required parts in mild steel and repaired other parts where required. The final bill was a fraction that of what he’d expected and he wafted off into the sunset, another happy customer.

Ferrari Jigsaw

Thursday, September 8th, 2011

 

 

 

 

 

 

 

 

 

This Ferrari P6 kit came to us for an exhaust build. The engine is from a 355 so I think it’s fair to say it’ll be loud. The problem is the car needs to meet the IVA compliance of 99db and have catalytic converters. the engine needs to breath freely though matched length primary headers and have it’s secondary air system, temperature sensors and lambdas included. The customer also wanted quad tips and a cross over adding, all in the space of about 3 feet and without fouling the closely fitting body. That’ll all add up to a challenge then. We just about squeezed it all in there, the pictures speak for themselves. The finished article looks beautiful but as the car is incomplete we couldn’t check the noise levels. we’ll continue to work with the customer though until his creation is on the road.

 

 

Moggy weldathon

Thursday, July 28th, 2011

We’ve been doing a  lot or Morris Minors recently. I think a lot of owners are pre-empting an increase in value so have taken to welding and waxoyling. This Morris needed lots of welding on the floor, but the further we got into it the more it needed. You can see from the pictures the amount of panels that went into the car, that’s not counting the ones we had to make! It took 2 solid weeks of cutting, dressing, welding, fabricating, welding again, dressing some more then waxoyling to get some strength  back into the old girl. After all of that I’m sure she’ll be on the road for another 30 years yet.

Awkward Alfa

Thursday, July 28th, 2011

This beautiful looking GTV had been giving it’s owner headache and heartache for months. The owner wasn’t shy when it came to getting his hands dirty and certainly know’s his way around Alfa’s. Everyone needs a little help from time to time though and we’re more than happy to work alongside the owners efforts.  The car has a pretty big turbo blowing through twin 40 DHLA carbs with a Canems ECU controlling the sparks. Every part of the system had faults that interfered with each other making the task of getting it running like trying to knit spaghetti. We did a little rewiring and resetting of things which improved the situation. Sadly as hard as we tried the carbs wouldn’t work sweetly, although it was healthy enough for an MoT. These projects are rarely a quick fix, more work in progress. The owner has new carbs on the way and we’ll try again when they arrive. Despite the challenge it’s a pleasure working on such a beautiful and special classic.

PPC in the Park

Tuesday, June 14th, 2011

AA Silencers were at Practical performance car’s annual show and Mallory Park. AA Silencers owner Mark Hammersleys is a writer for the magazine and gave passenger rides and driver tuition at the show. He also took out the magazines Rolls Royce for some demo laps. AA Silencers staff also took their cars out for some track action

Crusty Moggy

Tuesday, June 14th, 2011

This Moggy has been in to us before for a bit of rolling restoration. This time there was only a small crack in the chassis rail at the front. We cut it out and treated the inside of the rail with rust killer. A new chassis section was then grafted in and the whole thing treated to a dose of Waxoyl. The owner of this car takes a lot of pride in it. It’s a pleasure to take the time to do a thorough repair to a high standard.

Porsche lacking pressure

Monday, November 29th, 2010

This 928 should have been the 2010 Race car for Mark Hammersley of AA Silencers.  The car belongs to Kev Leaper of Practical Performance Car magazine and driving honours where to be shared out over the 40 minute races in CSCC Future Classics. Unfortuantely on it’s first outing at Brands Hatch the engine failed. On inspection it is suspected the failure was due to low oil pressure, a common problem on 928’s. As a result the engine needs a rebuild along with a full dry sump kit added to solve our future oil pressure. The engine will probably be converted from mechanical to electronic fuel injection while we’re at it.

Capri Construction

Monday, November 29th, 2010

The AA Silencers Capri is finally going back together. The inside and engine bay have been painted and lots of weight taken out. There have been various changes to the oil and cooling systems plus fuel system. The Aerodynamic underfloor is ready for construction and the exhausts need finishing but it’s taking shape ready for the start of the next race season.